Oil Pan, Engine

Press the oil pan against the transmission.
Tighten the screws (1), (2), (3) and (4) 3 Nm
First Tighten the screws (5) 25 Nm
Then tighten 48 Nm
Tighten all screws in the oil pan joint. 17 Nm

Connect the oil cooler to the oil pan.
Use four screws. Tighten 17 Nm

Install the front-rear member to the body. Use four screws. Tighten 69 Nm
Tighten the screws in the engine mountings. Tighten 55 Nm

Install the heat deflector plate in front of the output shaft. Tighten 10 Nm
Install the support strut between the suspension turrets. Tighten 55 Nm

Install new oil filter.

Install the oil plug with a new gasket. Tighten 35 Nm

Oil trap 15 Nm

Oil pan plug 38 Nm