Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-4308

Condition
The engine control module (ECM) checks the pressure in the fuel tank by measuring the current through the leak diagnostic pump.
The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers that the pressure is not within certain limits. The engine control module (ECM) interprets this as leakage in the fuel system.
The diagnostic trouble code (DTC) can be diagnosed when the leak diagnostic system is run.

Substitute value
- None.

Possible source

Major leak
- The fuel tank filler cap is not correctly tightened
- Leaking fuel tank, fuel filler pipe, fuel tank filler cap, EVAP canister, leak diagnostic pump, evaporative emission system (EVAP) valve, or in the hoses between these components
- Blocked evaporative emission system (EVAP) valve.

Minor leak
- Leaking fuel tank, fuel filler pipe, fuel tank filler cap, EVAP canister, leak diagnostic pump, evaporative emission system (EVAP) valve, or in the hoses between these components
- Blocked evaporative emission system (EVAP) valve.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.