Activated Too Long. Permanent Fault

Activated too long. Permanent fault

Checking the control
Check that the control does not stick in the activated position.
Replace the turn signal lamp switch.
Remedy as necessary.

Other information:
- To replace the turn signal lamp switch, see Turn signal switch, replacing Turn Signal Switch, Replacing



Continue - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After the repair it is necessary to check that the fault has been rectified.




- Ignition off.
- Connect the connectors, install the components, etc.
- Ignition on.
Check that all indicator switch functions work.





Does switch work?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - Fault Found

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - No Fault Found

Attempt New Test - Checking the control

-------------------------------------------------