Connecting Rod, Engine

Summary Of Specific Components And Tightening Torques

NOTE: Screws coated with locking fluid or sealant must be replaced with new when reinstalled.

Always use new screws and nuts when angle tightening. Any exceptions to this rule will be indicated in the method.

Angle-tightening in tight spaces.

Connecting rod cap (connecting rod with treated toothed surface between the connecting rod and cap, screw with waist)
Stage 1 20 Nm
Stage 2 angle-tighten 90 degree

Connecting rod cap (connecting rod with fracture surface between the connecting rod and cap, fully threaded screw)
Stage 1 30 Nm
Stage 2 angle-tighten 90 degree