Checking the MD Module (MP1)

Checking the MD Module (MP1)

Fault-tracing information

Hint: Check that the volume is not turned down.

Check other sound sources, to see if the radio works for example.

Do other sound sources work?

Yes - Checking the component

No - Checking the sound

-------------------------------------------------

Checking the sound
Check that the settings (volume, fade, balance, central volume or power volume) are not causing the fault symptom.
Check the sound reproduction from multiple sources.
Check that all the connectors are correctly connected to the audio module (AUD) and amplifier.

Was a fault detected?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------

Checking the component
Try listening to another MD Module (MP1).

Is there sound reproduction from the MD Module (MP1)?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information
The fault should now have been detected and remedied. As this is not the case, the fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or try again.

Do you want to exit fault-tracing?

Yes - No Fault Found

No - Fault-tracing information

-------------------------------------------------