Lock Mechanism Rear Side Door, Replacing

Lock mechanism rear side door, replacing

The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removing the lock mechanism for the rear side door
The window must be closed before beginning removal.





Remove:
- the door panel. See Panel rear side door, replacing Panel Rear Side Door, Replacing
- the run-off profile
- the link for the inner lock button
- the link for the external handle
- the 3 screws.
Lift the lock out of the door.
Remove the connector.
Unhook the cable.
Remove the cover from the top of the lock.

Installing the lock mechanism for the rear side door

Note! For tightening torques, see Specifications [1][2]Body and Frame.

Press down the cover (1) on the top of the lock.
Press in the locking plug (2).
Hook the cable into place.
Connect the connector.
Lift the lock into the door.

Install:
- the 3 M6 screws. Tighten
- the link for the external handle
- the link for the inner lock button
- the run-off profile
- the door panel. See Panel rear side door, replacing Panel Rear Side Door, Replacing.