Boot CV Joint Housing, Replacing
Boot CV joint housing, replacingSpecial tools: 951 2619
Note: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.
Preparatory work
Removing drive shafts
Remove the drive shafts.
Method content
Note: Do not stop work until the constant velocity joint housing is assembled.
This method consists of:
- Outer constant velocity joint housing with boot, replacing
- Components on the outer constant velocity
- joint housing, replacing
- Inner constant velocity joint housing with boot, replacing
- Components on the inner constant velocity
- joint housing, replacing
- Installation preparations
- Installing the boot
- Finishing