Checking MD Player Disc Insertion/Removal

Checking MD player disc insertion / removal

Fault-tracing information
Check that nothing is in the way or is in the MD player.
Remedy as necessary.

Was a fault detected?

Yes - Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component
Before continuing with fault-tracing, the following must be checked:
- All tests for the relevant symptom must have been carried out
- No component, connector or wiring faults etc. should have been detected.
Try a new head unit / audio module.

Caution! New head unit / audio control modules are supplied without software. The head unit / audio control module must be programmed after it has been replaced.

Other information:
- For information about programming and accessing or replacing the main unit and/or audio control module, see Radio/telephone, changing Service and Repair.

Was a fault detected?

Yes - Fault Found

No - No Fault Found

-------------------------------------------------