Operation CHARM: Car repair manuals for everyone.

Open






Open

Checking the component
- Slacken off the evaporative emission system (EVAP) valve
- Connect a vacuum pump to the evaporative emission system (EVAP) valve terminal (B). Pump a vacuum. Check that there is no leakage through the evaporative emission system (EVAP) valve by listening to and checking via the pump gauge that the pressure is stable
- Connect the Evaporative emission system (EVAP) valve connector
- Ignition on
- Activate the evaporative emission system (EVAP) valve. When the Evaporative emission system (EVAP) valve is activated, the valve opens and clicks. Check on the pump gauge that the vacuum drops (the pressure evens out) when the evaporative emission system (EVAP) valve opens.
If the function is OK, there must be no leakage when the evaporative emission system (EVAP) valve is closed (stable pressure on the pump gauge) and the vacuum must drop when the evaporative emission system (EVAP) valve opens (the pressure evens out).
The evaporative emission system (EVAP) valve is damaged if the function is faulty.
If the function of the evaporative emission system (EVAP) valve is correct, check the hose and hose connections between the evaporative emission system (EVAP) valve for leakage.
Remedy as necessary.

Other information
- Location of components, 6 cylinder turbocharged engines: Location of components Locations
- Location of components, 6 cylinder normally aspirated engines: Location of components Locations
- Location of components, on 5 cylinder engines: Location of components Locations










Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - Fault Found

------------------------

Attempt New Test - Checking the component

FAULT FOUND - Fault Found

-------------------------------------------------