Internal Fault

Internal fault

Replacing the control module and programming




- Ignition off.
The control module has registered an internal fault.

Caution! A new control module is delivered without software. The control module must be programmed and calibrated in order to function after replacement.

Other information:
- Suspension module (SUM), replacing Service and Repair.






Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - Fault Found

------------------------

Attempt New Test - Replacing the control module and programming

FAULT FOUND - DONE

-------------------------------------------------