Computers/Controls - Various Software Related Issues
Status: ReleasedStatus Date: 2010-04-08
Issue Date: 2010-03-31
Refence: VIDA
Title: "Shift to P" message in Driver Information Module (DIM)
Ref No: US22804.1.1 en-GB
Issuer -
Partner: 3 US 7510 Volvo Cars North America
Func Group 4900
Func Desc: miscellaneous
Attachment
Vehicle Type
CSC
DTC
Text
For Your Information CSC Customer Symptom Code
Note! If using a printed copy of this Retailer Technical Journal, first check for the latest online version.
DESCRIPTION:
After a software download (SWDL) or a programming session the Transmission Control Module (TCM) may send out an incorrect value for the gear lever position. This will cause some functional disturbances.
^ The engine can not be shut off** with one push to the start/stop switch and there will be a "Shift to P" message in the DIM.
^ Park Assist Camera (PAC) will not show the reverse camera image. This will also cause a PAC Diagnostic Trouble Code (DTC) U040268-Invalid Data Received from Transmission Control Module
^ Central Electronic Module (CEM) will not activate the reverse camera.
**Note that the engine and ignition can still be shut off by holding the start/stop switch for 2-3 seconds.
PRODUCT MODIFICATION:
Beginning with the production of Model Year (MY) 2011 vehicles the TCM will have a new diagnostics that takes care of this problem.
SERVICE:
Do NOT replace any parts for this symptom!
After any SWDL/Programming session take the keys out of the car and let it go to sleep (this takes roughly 2-3 minutes). At the next start up everything should work as normal.