Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-B000211

Condition
The Supplemental restraint system module (SRS) checks the direct current (DC) in the circuit for the driver's airbag, stage 2.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Direct current (DC) is too low.
- Incorrect value runs longer than 2.5 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition position II and III.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to ground in the cable.
- Contact resistance or oxidation in the terminals.
- Short-circuit in connections.
- Short-circuit to ground in the contact reel.

Fault symptom[s]
- SRS warning light on
- SRS warning message displayed