Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B10A206

Condition
The Central electronic module (CEM) checks the collision signal from the Supplemental restraint system module (SRS)
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Incorrect value from both collision output signals.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- Latest approved value.

Possible source
- Contact resistance or oxidation in the terminals.
- Open-circuit in the signal cable.
- Incorrect voltage supply to the supplementary restraint system (SRS).

Fault symptom[s]
- Text window and warning symbol/Text message