Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-B10CF24

Condition
When the spring bolt switch activates, a counter starts.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The lock piston switch has been active for more than 5 minutes.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Closing of spring bolt switch.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Damaged switch.
- Door handle has been held out for longer than 5 minutes.
- The signal cable is short-circuited to ground.

Fault symptom[s]
- None.