Fault-Tracing Information

Fault-tracing

Initializing the position of the window
The window's position has never been initiated or the control module has lost the information about the window's position.
Move the window to its upper limit position using manual control.
Run an initialization by clicking the VCT2000 symbol.





Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check that the automatic operation of the power window mechanisms works.

Is the power window control operating correctly?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Initializing the position of the window

-------------------------------------------------