Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
In vehicles equipped with BLIS-system, there is a camera mounted in each external rearview mirror.
Driver door module (DDM) supplies voltage to the camera on the driver side of the vehicle.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal too low from the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to ground in the power supply cable.

Fault symptom[s]
- LED does not light
- Message in information display