Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TCM-P060100

Condition
The Transmission control module (TCM) has three different internal memories, one for the program application (FLASH), one for permanent storage of information (EEPROM) and one for current information (RAM).
With the ignition off, certain information is saved from RAM to EEPROM and then the information is erased from RAM.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The checksum calculated after the ignition is switched on differs from the saved one.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Auxiliary program Emergency mode 1 in the transmission control module (TCM) has started.

Hint: Emergency mode in the event of a fault Emergency Mode In The Event Of A Fault

Possible source
- Internal fault in the transmission control module (TCM).

Fault symptom[s]
- No gear shift
- Rough gear shift
- Automatic transmission/Lockup does not work
- Text window and warning symbol/Text message
- Warning lights and chimes/Malfunction Indicator Light ("Check engine" light) indication/no indication