Fault-Tracing Information

Fault-tracing

Faulty software
The control module has registered that invalid or incorrect data has been obtained from the vehicle configuration file.
This can be due to a fault in the Central electronic module (CEM).

Downloading new software
Remedy the fault by loading new software into the Central Electronic Module (CEM).
After downloading new software to the Central electronic module (CEM), new software must also be downloaded to the Driver information module (DIM).


Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Does the combined instrument panel work as it should?

Does the combined instrument panel work as it should?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Faulty software

-------------------------------------------------