Fault-Tracing Information

Fault-tracing

Replacing a component
The control module has registered an internal fault. Replace the control module.

Other information





Continue - Initializing the position of the window

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check that the automatic operation of the power window mechanisms works.

Is the power window control operating correctly?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information

Attempt New Test - Replacing a component

-------------------------------------------------

Initializing the position of the window
After replacing the control module, the window position must be initialized.
Move the window to its upper limit position using manual control.
Run an initialization by clicking the VCT2000 symbol.





Continue - Verification

-------------------------------------------------