Fault-Tracing Information

Fault-tracing

Information

Note! If Infotainment control module (ICM) has detected the diagnostic trouble code ICM-U1A2400, begin by troubleshooting it. Malfunction may be due to open circuit on the MOST-net.

If the problem remains or if Infotainment control module (ICM) has not detected the diagnostic trouble code ICM-U1A2400, continue with the following:
- Troubleshoot in the transmitting control module.
- Check that the fuses are intact.
- Replace the control module.

Other information
- Bluetooth control module Bluetooth Control Module
- Control module information and entertainment Service and Repair
- Audio Module Audio Module

Continue - Verification

-------------------------------------------------

Verification









Hint: After carrying out the repair check that the fault has been remedied.

- Ignition on.
- Reinstall the connectors, components etc.
- Ignition on for at least 12 seconds.
Read out the control module's id-number by clicking on the symbol for VCT2000.





Can the control module ID be read off?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information
The fault must be diagnosed and remedied. As this is not the case, the fault-tracing has failed.
Exit fault-tracing or try again.

Do you want to exit fault-tracing?

Yes - DONE

No - Information

-------------------------------------------------