Variable Induction System: Service and Repair

Distribution damper intake manifold

Operation number: 25132-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the intake manifold. Refer to: Induction pipe, B6324S5, B6324S4 Service and Repair.










If the damper has jammed in the open position it must be screwed back as illustrated.
Make a hole at the mark and screw clockwise to close the damper.
Use: Allen key, 3 mm.






Installation

To install, reverse the removal procedure