Lighting and Horns: Testing and Inspection

Checking local lighting

Checking the connectors








- Ignition off
- Check the power door mirror connector. Check for contact resistance and oxidation.
In particular, check for any damage
- Ignition on.

Other information:
- To access the power door mirror connector, see Outside temperature sensor door mirror, replacing Outside Temperature Sensor Door Mirror, Replacing
- Checking wiring and terminals Checking Wiring And Terminals





Is the lamp in the power door mirror working?

Yes - FAULT FOUND

No - Checking the components and wiring

-------------------------------------------------

Checking the components and wiring
Check the cable between door control module terminal #10B and power door mirror terminal #6. Check for an open-circuit. Check for a short-circuit to supply voltage.
Check the cable between door control module terminal #8B and power door mirror terminal #13 for an open-circuit.
Remedy as necessary.

Other information:
- Connecting the breakout box Connecting The Breakout Box, Driver Door Module (DDM) / Passenger Door Module (PDM)
- To access the power door mirror connector, see Outside temperature sensor door mirror, replacing Outside Temperature Sensor Door Mirror, Replacing
- Bulb, door mirror, ground lighting Bulb, Door Mirror, Ground Lighting
- Checking wiring and terminals Checking Wiring And Terminals





Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check if the lamp in the power door mirror lights.





Is the bulb in the power door mirror working?

Yes - VERIFIED

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Checking the connectors

-------------------------------------------------