Headlamp Washer Spray Nozzle: Service and Repair

Nozzle high-pressure washer headlamp, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work




Pull the cover straight out.
Detach the cover from the nozzle as illustrated.
Pull out the washer using pliers.
Lock the washer in the extended position.

Note! Do not scratch the bumper.

Removal




Release the lock using a screwdriver.
Pull out the nozzle.
Release the washer.

Installation
Press the nozzle into place.
Pull out the washer using pliers.
Install the cover.
Carefully release the washer.
Adjust the alignment of the nozzle as necessary as illustrated. The cover must be against the bumper cover without any play.
Check the function