Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information AUD-0009

Condition




The diagnostic trouble code (DTC) is stored if the Audio module (AUD) registers that the signal on the signal cable to the rear left loudspeaker is too low.
The diagnostic trouble code can only be diagnosed when voltage is on (12 V). In other words, the diagnostic trouble code (DTC) can only be diagnosed when the ignition is turned from position 0 to positions II.

Substitute value
- None.

Possible source
- The signal cable between the rear left-hand loudspeaker and the control module has a short-circuit to ground.

Fault symptom[s]
- No sound from the loudspeakers.