Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-2F06

Condition




The central electronic module (CEM) checks the signal from the passenger seat position sensor.
The diagnostic trouble code (DTC) is stored if the control module registers a faulty signal on the signal cable.
The diagnostic trouble code (DTC) can be diagnosed in ignition positions I, II or III.

Substitute value
- None.

Possible source
- Open-circuit or contact resistance in the signal cable or in the connectors between the central electronic module (CEM) and the passenger seat position sensor
- Open-circuit in the passenger seat position sensor
- Short-circuit between the two signal cables connected between the central electronic module (CEM) and the passenger seat position sensor
- Short-circuit in passenger seat position sensor
- Damaged driver's seat position sensor, resulting in a current value outside the permitted range from the passenger seat position sensor.

Fault symptom[s]
- The information lamp is lit
- SRS warning message displayed.