Faulty Signal

Faulty signal. Permanent fault

Checking input signal
Read off the value for Hall sensor 3.
The value should not change when the seat is not affected.

Hint: If the value counts up or down there may be a fault in the sensor, an intermittent short-circuit to supply voltage or an internal fault in the power seat module (PSM).

Remedy as necessary.

Other information:
- To connect the breakout box, see Connecting the breakout box, power seat module (PSM) Connecting The Breakout Box, Power Seat Module (PSM).
- For information on signals, refer to Signal specification, Power seat module Signal Specification, Power Seat Module (PSM).









Continue - FAULT FOUND

-------------------------------------------------