Internal Fault

Internal fault

Internal fault

Note! This diagnostic trouble code (DTC) may be stored after programming one of the vehicle control modules. If this has occurred, the control module must only be reprogrammed. The control module must not be replaced.The battery must be fully charged before reprogramming is carried out!If the diagnostic trouble code (DTC) has been stored previously, the entire control module must be replaced.

The supplemental restraint system module (SRS) has registered an internal fault.

Caution! A new supplemental restraint system module (SRS) is delivered without software. The control module must be programmed in order to function after replacement.

For further information about programming and replacing the supplemental restraint system module (SRS): Control module SRS (supplemental restraint system), replacing Service and Repair





Continue - FAULT FOUND

-------------------------------------------------