DTC 113

DTC 113: Yaw Rate-Lateral Acceleration Sensor (Power Supply)

1. Turn the ignition switch OFF.
2. Disconnect the yaw rate-lateral acceleration sensor 4P connector.
3. Turn the ignition switch ON (II).
4. Measure voltage between body ground and yaw rate lateral acceleration sensor 4P connector terminal No. 1.





Is there battery voltage?

YES - Replace the yaw rate-lateral acceleration sensor.

NO - Repair open in the wire between the No. 4 (7.5 A) fuse in the under-dash fuse/relay box and the yaw rate-lateral acceleration sensor.