DTC 114

DTC 114: Yaw Rate-Lateral Acceleration Sensor Installation Problem

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Check for DTCs with the HDS.

Is DTC 114 indicated?

YES - Replace the yaw rate-lateral acceleration sensor.

NO - Intermittent failure, the system is OK at this time. Check for loose terminals at the yaw rate lateral acceleration sensor 4P connector. Refer to intermittent failures troubleshooting. How to Troubleshoot DTCs