Programming and Relearning

Keyless Entry Transmitter Programming

1. Have the immobilizer PCM code from the iN system.

2. Connect the HDS to the data link connector.

3. Turn the ignition switch to ON (II).

4. Select IMMOBI from SYSTEM SELECTION MENU, then select the IMMOBILIZER SETUP menu.

5. Select Keyless Transmitter Registration.

6. Do the registration according to the instruction of HDS screen.

7. Turn the ignition switch to LOCK (0) and remove the key. Wait 10 seconds and verify that all remotes being programmed are functioning properly.