Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Register >> Service and Repair >> Passenger's Vent Panel Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Passenger's Vent Panel Removal/Installation




Passenger's Vent Panel Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Take care not to scratch the dashboard and related parts.

1. Remove these items.
- Center trim, both sides Dashboard Center Trim Removal/Installation

- Utility pocket housing Utility Pocket Housing Removal/Installation

- Instrument fascia Instrument Fascia Removal/Installation

- Audio unit Audio Unit Removal/Installation

2. Remove the passenger's vent panel (A).
-1 Open the glove box.
Gently pull out the panel to release the clips (B, C).
-3 Disconnect the hazard warning switch/passenger's airbag cutoff indicator connector (D).

3. Install the panel in the reverse order of removal, and note these items:
- Replace any damaged clips.

- If the clips are damaged or stress-whitened, replace them with new ones.

- Make sure the connector is plugged in properly.





pro multis · About Operation CHARM