Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Relay Box >> Service and Repair >> Driver's Under-dash Fuse/Relay Box (MICU) Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver's Under-dash Fuse/Relay Box (MICU) Removal/Installation




Driver's Under-dash Fuse/Relay Box (MICU) Removal/Installation

Special Tools Required

- Relay puller 07AAC-000A1A0
SRS components are located in this area Review the SRS component locations. Locations and precautions and procedures Service and Repair before doing repairs or servicing.

Removal

1. Do the battery terminal disconnection procedure. Procedures

2. Remove the left front door sill trim and left kick panel. Interior Trim Removal/Installation - Front Door Sill Area

3. Disconnect the connectors from the fuse side of the driver's under-dash fuse/relay box (A).
NOTE: If necessary, remove the parking brake pedal assembly to make space.

4. Remove the mounting bolt, release the tab (B) and pull the driver's under-dash fuse/relay box away from the body.

5. Disconnect the connectors and remove the driver's under-dash fuse/relay box.

6. Carefully remove the relays using the relay puller.
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.






Installation

1. Install the relays and connect the connectors to the driver's under-dash fuse/relay box, then install the driver's under-dash fuse/relay box in the reverse order of removal.

2. Install the removed parts in the reverse order of removal.

3. Do the battery terminal reconnection procedure. Procedures

4. Confirm that all systems work properly.

pro multis · About Operation CHARM