Center Console Rear Trim Removal/Installation

Center Console Rear Trim Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the center console or the related parts.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Gently pull out the center console rear trim (A) to detach the clips and to release both upper tabs (B) on the console, then remove the trim.

2. Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.