Instrument Cluster / Carrier: Service and Repair
Gauge Control Module Replacement
NOTE: Before replacing the gauge control module, do the "Rewriting the ODO Data and Transferring the Maintenance Minder Data to a New Gauge Control Module" Programming and Relearning.
1. Remove the instrument fascia Instrument Fascia Removal / Installation.
2. Remove the screws from the gauge control module (A).
3. Disconnect the connectors (B), and remove the gauge control module.
4. Install the gauge control module in the reverse order of removal.
5. Rewriting the ODO data and transferring the maintenance minder data to a new gauge control module Programming and Relearning
NOTE: Check the official Honda website for more information on how to write odometer information to a gauge control module that will not communicate with HDS.