Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2011 >> ZDX V6-3.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Stabilizer Bar >> Stabilizer Link >> Service and Repair >> Front Stabilizer Link Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Stabilizer Link Removal/Installation




Front Stabilizer Link Removal/Installation

1. Raise and support the vehicle Service and Repair.

2. Remove the front wheel.

3. Remove the flange nuts (A) while holding the respective joint pin (B) with a hex wrench (C), then remove the stabilizer link (D).





4. Install the stabilizer link on the stabilizer bar (E) and the damper (F) with the joint pins set at the center of their range of movement.

NOTE: The stabilizer link has a white paint mark (G).

5. Install the new flange nuts, and tighten them to the specified torque while holding the respective joint pin with a hex wrench.

6. Clean the mating surfaces between the brake disc and the inside of the wheel, then install the front wheel.

pro multis · About Operation CHARM