Splash Guard: Service and Repair

Splash Shield Replacement

Special Tools Required

- Push Push Pin Puller 07AAC-SJAA100

NOTE:

- Use the special tool to remove the clips.
- Take care not to scratch the body or the related parts.
- Put on gloves to protect your hands.

1. Remove the splash shield (A).

1. Remove the clips (B) that secure the front inner fender (C) and the splash shield to the body.

2. From under the front bumper (D), remove the bolts (E) and the clips (F) (with engine undercover).

3. From under the body, remove the bolts (G) and the clips (H).

4. Release the hooks (I) of the splash shield, then pull out the splash shield.





2. Install the splash shield in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.