Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2012 >> TL FWD V6-3.5L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Instrument Panel >> Instrument Panel Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Instrument Panel Control Module: Service and Repair




Gauge Control Module Replacement

NOTE: Before replacing the gauge control module, retrieve the ODO data and transferring Maintenance Minder information from the gauge control module with the HDS Programming and Relearning.

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

2. Adjust the steering column to full tilt down position and to the full telescopic pull position, then remove the instrument fascia Instrument Fascia Removal / Installation.

3. Remove the three screws from gauge control module (A), then pull the gauge control module out carefully.





4. Disconnect the 32P connector (B) from the gauge control module.

5. Install the gauge control module in the reverse order of removal.

6. Do rewriting the ODO data and transferring the Maintenance Minder data to a new gauge control module Programming and Relearning.

NOTE: Check the official Honda website for more information on how to write odometer information to a gauge control module that will not communicate with the HDS.

pro multis · About Operation CHARM