Trunk / Liftgate Latch: Service and Repair

Tailgate Latch Replacement

NOTE:

- Put on gloves to protect your hands.
- If the tailgate latch cannot be unlocked by using the keyless entry transmitter or the inside/outside tailgate switches, remove the maintenance lid (A) from the tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.





1. Do the battery terminal disconnection procedure.

2. Remove the tailgate lower trim panel .

3. Detach the harness clip (A). Disconnect the power tailgate closer unit connectors (B), and remove the bolts (C, D) securing the tailgate latch (E).






4. Pull out the tailgate latch (A), then remove it.





5. Install the latch in the reverse order of removal, and note these items:

- Make sure each connector is plugged in properly.
- Do the battery terminal reconnection procedure.
- Check for any DTCs that may have been set during repairs, and clear them.
- Make sure the tailgate opens properly and locks securely.