Fig. 3 Install Right Bearing Outer Race In Transmission Housing

Differential, Disassembling and Assembling

Special Tools And Equipment

- VW295 Needle Bearing Drift
- VW408A Punch
- VW472/1 Pressure Piece
- 30-205 Thrust Pad

Notes:

- Replace both tapered roller bearings together.

Fig. 3 Installing right tapered roller bearing outer race in transmission housing






- Insert VW472/1 pressure piece together with cone in outer race.

Note:

- For transmissions with drive flange without polygon bearing use 30-205 thrust pad and VW295 needle bearing drift.