Fig. 5 Pressing on Right Tapered Roller Bearing Inner Race

Differential, Disassembling and Assembling

Special Tools And Equipment

- VW401 Thrust Plate
- VW407 Punch
- VW4471 Thrust Pad
- 40-21 Sleeve
- 3296 Tube

Notes:

- Replace both tapered roller bearings together.

Fig. 5 Pressing on right tapered roller bearing inner race






WARNING!:

- Wear protective gloves!

- Heat inner race to approximately 100 °C (212 °F), position and install.

Note:

- For transmissions with drive flange without polygon bearing use 40-21 sleeve.