Fig. 15 Allocation of Circlips

Allocation of circlips

- Circlips -1- and -2- secure the input shaft ball bearing.
- Determining thickness Input Shaft, Adjusting

- Circlip -3- secures the 3rd and 4th gear synchronizer hub.

- Thickness: 2.00 mm (0.078 inch).

- Identification: brown in color.

- Circlip -4- secures the 3rd and 4th gear synchronizer hub.
- Determining thickness Fig. 16 Determining Thickness of Circlip

- Identification: blue in color.

- Circlip -5- secures the 5th gear.
- Determining thickness Fig. 16 Determining Thickness of Circlip