Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2000 >> A6 Quattro Sedan (4B4) V8-4.2L (ART) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Central Electronics Box >> Service and Repair >> E - Box In Plenum Chamber, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

E - Box In Plenum Chamber, Removing and Installing




Removing







- Remove plenum chamber cover bolts (arrows) and remove cover.
- Remove Engine Control Module (ECM) and auxiliary fuse/relay panel.
- Disconnect electrical connectors.
- Pull engine wiring harness out together with grommet from E-box.







- Remove two nuts -A-.
Tightening torque: 2 Nm (18 in. lb)
- Lift up E-box at rear and pull out of mounting -B-.

Installing
- When installing gasket -C-, make sure that opening in body is not covered.
- Install in reverse order of removal.
pro multis · About Operation CHARM