Diagram 6/3 (Tracks 15-28)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Central control module for comfort system, Motor to unlock rear lid
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
F9 - Parking Brake Warning Light Switch ABS/Electronic Stabilization Program Overview
F248 - Switch for unlocking, rear lid lock cylinder
H12 - Alarm Horn Convenience System Overview
J393 - Central control module for comfort system Convenience System Overview
T4l - 4-Pin Connector, black, in rear lid
T12h - 12-Pin Connector, black, on central control module for comfort system (used to be Connector 1)
T12i - 12-Pin Connector, black, on central control module for comfort system (used to be Connector 3)
T16i - 16-Pin Connector, brown, on central control module for comfort system (used to be Connector 5)
V139 - Motor to unlock rear lid Convenience System Overview
(86) - Ground connection -1-, in rear wiring harness
(135) - Ground connection -2-, in instrument panel wiring harness
(249) - Ground connection -2-, in wiring harness interior
(A24) - Wire connection (brake system monitoring), in instrument panel wiring harness
(A66) - Connector (30a, central locking/anti-, theft warning system/IR), in instrument panel wiring harness
* - with alarm system only
** - for avant, see applicable avant rear wiring diagram
Previous Diagram 6/2 (Tracks 1-14)
Next Diagram 6/4 (Tracks 29-42)