With Manufacturer Scan Tool

Erase DTC Memory (Function 05)

NOTE: If it is not possible to erase the DTC memory, check the DTC memory again and repair any DTCs that may exist.

Prerequisites
- DTC memory checked
- All DTCs repaired.

After DTC memory has been successfully checked:

Performing function 05 - "Erase DTC memory"

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5-.

Indicated on display

Rapid data transfer Q
05 - Erase DTC memory

- Confirm input with -Q- button.

Indicated on display

Rapid data transfer ->
DTC memory is erased!

The DTC memory is now erased.

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE:
- This message indicates an error in the test sequence:

Attention! ->
DTC memory is not checked

- This message indicates an error in the test sequence:

Rapid data transfer ->
DTC memory is not checked

Adhere exactly to test sequence: first check DTC memory, if necessary repair DTCs, then erase.

After erasing DTC memory carry out function 06 "End Output" then switch ignition off and on again and check DTC memory again.