DTC 17114

DTC 17114 / P0730





Note for DTC 17114 / P0730:
^ The monitoring of the transmission range by the Transmission Control Module (TCM) controls the transmission ratios by comparing transmission input and output RPM for the applicable engaged transmission range. This TDC is shown when an improper transmission ratio is detected (implausibility).
^ Men checking the full braking speed RPM, the transmission input RPM (when the car is not moving and a transmission range engaged) must be almost 0 at the torque converter. If this is not the case, this DTC is still shown since there could be a fault with the clutch (Read measuring value block; display group number 001).