Display Group 009
Test table for transmissions with hydraulic control E18/2
Display Group 009, Display Fields (1-2):
Note: Test requirements for torque converter slip speeds:
^ "TC closed": Shifting process must be complete (wait at least 1 sec.), the Torque Converter (TC) must be closed and the accelerator pedal value must be constant
^ "TC control": Indicated values are valid for the "regulating condition" of the throttle converter (control). Under inconvenient conditions (e.g. accelerating on a hill), this condition is not reached until 20 seconds after the shifting process has been completed. During this regulating phase, slip values of up to 350 RPM can be reached.
^ Excessive torque slip speeds can also indicate slipping clutches or non-activated shifting elements.
