Diagnostic Mode 09 - Read Vehicle Information

Diagnostic Mode 09 - Read Vehicle Information

Diagnostic Mode 09 makes it possible to access vehicle-specific information from the ECM and the TCM (where applicable).

NOTE:
- Depending on scan tool and protocol used, Diagnostic Mode 09 and the information provided may be referred to by a different name.
- The PIDs activated depend on engine code.

Conditions
- There must not be any DTCs stored in DTC memory, Diagnostic Mode 03 - Read DTC Memory Diagnostic mode 3: Check DTC memory.

Work Procedure
- Connect diagnostic tester. Diagnostic Tester, Connecting
- Switch ignition on.
- Under address word 33, select "Diagnostic mode 9: vehicle information".
- Select desired vehicle information "Test ID XX".