Torsen Differential Assembly Overview

Torsen Differential Assembly Overview

• Removal can also be carried out with transmission installed.





1 Torsen housing

• With or without vibration dampener, depending on version.

• Removing and installing, refer to => [ Torsen Housing ] Torsen Housing.

• Disassembling and assembling, refer to => [ Torsen Housing ] Torsen Housing.

2 Bolt, 24 Nm

• Quantity: 6

3 Plate spring

• Installation position: The inner diameter camber faces toward flange shaft in torsen housing, refer to => [ Place plate spring in
torsen housing. ] Torsen Housing.

4 Adjustment shim

• Determine thickness, refer to => [ Slide torsen differential on hollow shaft
splines and press in direction of. ] Transmission.

5 Spring

• Place on flange shaft in torsen housing.

6 O-ring

• Always replace.

• Coat with transmission fluid.

• Insert in surrounding groove in transmission cover.

7 Torsen differential

• Service by manufacturer only.

• Torsen differential bearing, servicing. Refer to => [ Torsen Differential Bearing ] Torsen Differential Bearing.

8 Transmission

• Secure at assembly bracket, refer to => [ Transmission ] Transmission.