Ignition Coil: Service and Repair

Ignition Coils with Power Output Stages

Special tools, testers and auxiliary items required

• Ignition Coil Puller (T40039)

Removing:

- Remove both bolts - 1 - from connector strip.





- Pull all ignition coils approximately 30 mm out of spark plug shaft using Ignition Coil Puller (T40039).





- Release connectors and pull all connectors simultaneously off from the ignition coils.





Installing:

- Insert all ignition coils loosely into spark plug shaft.

- Align ignition coils to the connectors and then connect all of the connectors onto ignition coils.





- Press ignition coils uniformly onto the spark plugs by hand (do not use an impact tool).