Front Belt Anchor

Front Belt Anchor

• Removing and installing is identical for the left and right sides.

Removing






- Move the front seat all the way forward to the stop.

- Pry the cap - 1 - off using a screwdriver.

- Remove the bolt - 2 - and the front belt anchor - 3 -.

Installing

Install in reverse order of removal. Note the following:

- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.

- Slide the front belt anchor - 3 - with the socket - 4 - and lock washer - 5 - onto the bolt - 2 - and tighten.

- Check if the bolt is self-locking, then replace.

For the correct tightening specifications, refer to => [ Front Three-Point Seat Belt Overview ] Front Three-Point Seat Belt Overview.